Golfers wish to hit longer straighter tee shots.
Few spend most of their time practicing at the driving range while others opt for a new driver after a year or two, just so as to gain few extra yards off the tee.
Touch and accuracy are required in golf wedge play. Usually missing a putt leads to an extra putt.
Poor contact with a golf wedge generally leads to several multiple strokes.
Accurate wedge play results in short putts and good wedges allow for a good wedge play.
What is Loft?
The loft allows the player to strike the ball to different distances with the nearly same effort.
Loft refers to the angle of the clubface in accordance with the club shaft. The higher a club’s loft angle, the higher it will launch the ball.
A 3 iron has a loft angle exactly between 21 and 24 degrees. If swung accurately, it will touch the ball slightly below the center.
A 9 iron has a loft angle exactly between 45 and 48 degrees. If swung accurately, it will touch halfway between the center and the bottom of the ball.
The higher a club’s degree of loft, the more its face looks up, and the higher the ball travels.
Simply put, the more loft a club has, produces less side spin, and it gains more accuracy.
What is Bounce?
Bounce is a measurement for wedges. Bounce is referred to as an angle between the clubface and the sole of the club.
The club’s bounce promotes it from digging into the turf or sand, like a shovel. Bounce helps the club head to slide into the sand and not get hung up.
The players who desire to sweep the ball should prefer wedges with a bounce angle between 4 and 6 degrees.
The mid-bounce wedges have angles between 7 and 10 degrees. They are considered to be the best option and accommodate a vast range of conditions and swing types.
The high bounce wedges have angles of over 10 degrees.
What is the Correct Grind?
When the clubface is opened by the player or when their hands are even with the clubface on impact, the role of grind comes into play.
When there is no grind on a wedge, and the clubface is open, the degree of bounce tends to increase.
This particular situation will definitely lead to the dreaded bladed shot.
So with the correct grind, the wedge’s bounce angle will automatically increase. This makes it considerably easier to get under the ball and pop it into the air as was intended.
Is Choosing Grooves Necessary for a golf wedge?
Another important property of the golf clubs is grooved on the clubface. Grooves generally don’t play any role in dry weather.
In wet weather, they allow channeling any sand, grass, or dirt that could affect the shot taken by the player.
Several studies have shown several results about their effect on control and spin.
Most of the players will gain more from a clean clubface than any specific groove shape.
Why is Shaft Essential?
The shaft helps in connecting to the shot. The flex, length, alignment, and weight of the shaft play an important role in the accurate performance of the club.
The most commonly used materials for the club shafts are graphite, steel, and multi-material shaft.
Steel shafts are more durable, stronger, and are known to be less expensive than hybrid and graphite shafts.
Steel shafts never experience lateral twisting or torque which is natural in graphite shafts.
They provide better accuracy and control, but comparatively less distance than the graphite shafts.
Steel shafts are known to work best for players having normal to faster swinging speeds and need a little more control.
Graphite shafts are known to cost more than steel and are also considered to be less durable.
The lighter weight promotes faster-swinging speed and hence more power, but the flex reduces the control.
They’re considered to be the best choice for players who are unable to produce the swinging speed required to use a steel shaft efficiently.
A multi-material shaft combines a steel shaft with a graphite tip. The steel section has a solid shaft that generates good control.
The graphite tip optimizes feel and helps to filter vibration.